Investigating the impact of n-heptane (C₇H₁₆) and nanoparticles (TiO₂) on diesel-microalgae biodiesel blend in CI diesel engines

Recent global challenges encompass profound environmental pollution and the depletion of finite fuel resources. In this study, the biodiesel used in the mixture was derived from Azolla pinnata microalgae oil through a trans-esterification reaction chosen for its high oil concentration. During the initial phase of the experiment, varying volumes of biodiesel (5%, 10%, and 15%) and n-heptane (5%, 10%, and 15%) were introduced to diesel to form a ternary fuel blend. The experimental outcome shows that an n-heptane and biodiesel mixture of 10% by volume would produce the best results. Next, experiments were carried out by incorporating 10, 40, and 80 ppm titanium oxide (TiO₂) nanoparticles (NPs) in a recommended ternary fuel blend. The experimental investigation showed that D80A10H10TNP40 (diesel 80% + biodiesel 10% + n-heptane 10% + TiO₂ 40 ppm) caused a 7.21% increase in brake thermal efficiency (BTE) with a decrease in brake specific fuel consumption (BSFC) and brake specific energy consumption (BSEC) by 9.58% and 10%, respectively, compared to (diesel 80% + biodiesel 20%) D80A20. D80A10H10TNP40 exhibits lower emissions, with a significant reduction of 11.29% and 20.96% in carbon monoxide (CO) and unburnt hydrocarbons (UBHC), respectively. Nitrogen oxide (NO_X) and smoke emissions were reduced by 3.3% and 11.13%, respectively, compared to D80A10H10. Furthermore, D80A10H10TNP40 demonstrated enhanced combustion properties, comprising a significant rise of 4.39% in-cylinder pressure (CP), 35.29% in heat release rate (HRR), and 25.05% in the rate of pressure rise (RPR). The findings of this investigation indicate that D80A10H10TNP40 exhibits enhanced efficiency, emission, and combustion properties compared to the D80A20 fuel.